I am lucky to be in the position to see the advent panels from many of the fabric suppliers in the Summer months, which means I can order them ahead of time. Two weeks ago a bold of gorgeous advent panels arrived from Dashwood Fabrics. I have some new Junior Sewing Bees this year who will love making these up, but it is always good to have one ready-made for them to follow.
Most advent panels will be exactly like this – so if the one you have bought is a little different, the process is likely to be the same.
Panels generally come with instructions written on them. Following these instructions will get you to the stage of the panel sewn-up with no wadding or backing. Normally the panel is split into two parts, one that has the background of the panel and the other which has the pockets ready to be cut out on it. For the pockets, depending on the design of your panel you will cut out a strip of pockets or a single pocket. For my 2018 Dashwood panel, I had 5 strips of pockets to cut out. Read the instructions carefully so that you cut around the right lines.
Once your pockets are cut out, the normal next step is to iron down a hem on the top and bottom of the pocket or pocket strip and then go on and sew them he down on the top of the pockets or pocket strips. Next, the fold in the pocket needs to be ironed in place. For a single pocket, all that may be needed is a hem ironed down on each side of the pocket (meaning all sides are now folded over with the top one also sewn down). If you have a strip of pockets as I did, you will need to create box pleats between each of the pockets (as seen below) and then the ends are simply turned under.
Whichever way you need to iron the pockets, the next stage is to pin them on the other background piece and sew around them (side-bottom-side). If you are using pocket strips, you will also need now to sew a line to create divisions between the pockets on your strips. This is quick and easy to do and there is a printed line to follow.
With the panel now complete with the pockets on the background, you can now trim around the background as directed in the instructions. It is important to keep the panel as large as possible when you trim it as it will become smaller again when it is completed.
To give the calendar more body I used fusible wadding to iron onto the back. I only ever use fusible wadding for small projects, like bags, purses and calendar. It is pretty useless for larger projects. Once the wadding is ironed onto the back of the calendar use this combined piece as a template to cut out fabric for the back of the calendar. I used a Dashwood Flurry in Cream as it is in the same colour range as the panel itself.
At this point, I also added in some ribbon to create loops to hang the calendar from. I used four 8″ strips of 3/4″ ribbon. I fold them in half and placed them equidistant along the top of the calendar with the loop/fold pointing inwards and down onto the calendar (opposite to the way you may think they need to go). The backing fabric is then placed on top, with right sides together, and then sewn around with a small gap left for turning. The calendar is then turned the right way out, pressed and then topstitch all the way around, tucking-in and closing-up the turning gap.
Voila! We are ready to pop in some chocolate coins for each day of Advent.